Ürün Detayları
Bu içerik lebihmurah mağazası tarafından hazırlanmıştır.
Global'e Yumuşak Kil Sıcak Hava Aracı Isıyla Daralan Sac Ayar Aracı Lastik Damga Dıy Aracı
Package included:
1 x Hot Air Tool
Product Description:
Can be used to heating relief Pow der and shrinkable sheet
Keeping 3-5cm distance from work and about a 45 degree angle to heat until it is completed.
After completion, use the heat Tool at high temperature to blow a few seconds
It not only can add its hardness, but also its brightness
The temperature can not adjustable, in theory, it is 200 degree within a few seconds
Do not work over 10 minutes, blow at 45 degree angle to avoid heat suck
Be careful when using the hot air Tool
Specification:
Color: White+Black
Material: ABS
Type: Constant temperature
Working temperature: It is about 200°C / 390°F within a few seconds
Rated Energy: 300W
Energy type: AC Energy supply
Rated voltage: 230v
Energy:50Hz
Working time: 8 minutes
Usage:
1.Plug in the heat tool
2.Hold the Tool but do not touch the hot nozzle
3.Keep 5-6cm distance between the heat Tool and your work, about 45° for heating until the completion of the work
4.Turn off the Energy to stay cool
Notes:
1.This kind of Tool can not adjust the temperature but it heats up quickly at about 200℃ theoretically.
Therefore do not blow your Polymer Clay Works at one position for a long time to prevent distortion.
2. This heat Tool is not a High Energy one due to its 300W low Energy. But it is great for heating shrinkable film, embossed Pow der, rubber stamp, the best choice to replace toaster or oven and the polymer clay will become hard and bright after using the Tool.
Notice:
1.Please allow 1-2cm error due to manual measurement.Please make sure you do not mind before you bid.
2.The colors may have different as the difference display,please understand.