Bu içerik MyDukkan mağazası tarafından hazırlanmıştır.
The APX1000 delivers continuous, clean, stereo power to any live performance. Whether you are a sound contractor, gigging musician or live sound engineer, you need consistently clean power from your power amplifiers and the APX1000 brings it to every performance. The APX1000 provides a continuous 2 x 250W at 8ohms, or 2 x 500W at 4 ohms. In bridged mono mode, the APX1000 pumps out 1000 crystal-clear watts of power. Weighing in at only 12.1 lbs., the APX1000 goes into venues with amazing ease and convenience whether used in a permanent installation or portable application. The incredible power-to-weight ratio and performance quality of the APX 1000 means you'll get solid Class D power without breaking your back or your wallet.
Things can sometimes move at light speed on the stage. Connecting an amp should never slow you down. Balanced combo ¹â„â‚„” XLR, inputs, "Touch-proof" binding posts and speak-on jacks make connecting the APX1000 a snap at any gig, so you never lose precious time getting things going. Once installed, the APX1000's level and clip indicators to keep you informed of performance levels at a glance. Experience the APX1000 for yourself, or check out the APX1500 for installations and gigs requiring a little more power.
The APX1000 amplifier supplies massive power with plenty of headroom to drive any passive speaker. The APX1000 also contains low-noise cooling fans to prevent overheating and high-current toroidal transformers for the lowest possible noise floor.
Power Specifications:
Continuous power (20 Hz – 20 kHz):
Both channels driven: 2 x 390 W at 4 ohms, 2 x 250 W at 8 ohms (0.5% THD), 2 x 500 W at 4 ohms, 2 x 270 W at 8 ohms (1.0% THD EIAJ)
Bridged mono mode: 1 x 1000 W at 8 ohms, 1 x 520 W at 16 ohms
Input Sensitivity: 1.0 V
Input Impedance: 10 K Unbalanced
Frequency Response: (at 10 dB below rated output power), 20 Hz - 25 KHz (+0/-3 dB)
Voltage Gain: 32 dB
Distortion: (SMPTE-1M) <0.5%
S/N Ratio: 110 dB
Protection: On/Off, mute, DC-fault, load
Controls Front: Front Controls: AC power switch, 2 channel level control; –∠to +30 dB
Controls Rear: 30 Hz high-pass filter on/off, bridge/stereo/parallel mode
Signal Indicators: Signal present (green LED), clip (red LED), protection (red LED)
Power Indicators: 1 blue LED integrated with power switch
Input Connectors: Balanced XLR-F / ¼” combo
Output: Touch proof binding posts and Speakon® NL4 connectors
Power Supply: AC Power: 100 VAC, or 110 – 120 VAC or 220 - 240 VAC (50 / 60 Hz)
Dimensions (WxLxH): 19in x 11.2in x 3.5in
Weight: 12.1 lb
Bu İlan ENTEGRA Entegrasyon Sistemleri ile Listelenmiştir
Marka
Bu ürünle ilgili henüz yorum ve değerlendirme yapılmamış
Bu ürün için başka satıcı bulunamadı.
Ücretsiz Kargo
İstanbul
En geç 10 Mayıs Cuma
Sipariş verdiğiniz ürünleri teslim alırken; Kargo taşıma esnasında, olası vuruk, ezik, yırtılma gibi durumların tespit edilmesi durumunda, lütfen kargo yetkilisine zabıt tutturup ürünü teslim almayınız ve bizimle iletişime geçiniz. Unutmayın, imza atarak ürünü teslim aldığınızda; kargo firmasının görevini tam olarak yerine getirdiğini kabul etmiş sayılırsınız. Kargo esnasında olası zararları önlemek için, paketlemeye olabildiğince özen gösterdiğimizi bilmenizi isteriz.
İade / değişim
talebini oluştur
Ürünü mağazaya
gönder
Mağaza iade / değişimini
onaylasın
Paran kartına
iade edilsin
*Cayma Hakkı Kullanımı ve İade Şartları, 6502 Sayılı Tüketicinin Korunması Hakkında Kanun ve Mesafeli Sözleşmeler Yönetmeliği hükümlerine tabidir.